generate register model from sonics ip xact

EXCLUDED_BANK is an additional register bank which does not have a corresponding representation in the Simulink model.“Sonics is excited to work with Duolog Technologies to better serve our customers,” said Grant Pierce, CEO at Sonics. LPHP_FILTER_BANK contains registers which are mapped to LPHP filter coefficient inputs in the Simulink model. LP_FILTER_BANK contains registers which are mapped to LP filter coefficient parameters in the Simulink model. Inside the memory map, there are three address blocks ( LP_FILTER_BANK, LPHP_FILTER_BANK, and EXCLUDED_BANK). The bus interface ( PROCESSOR_BUS) contains a memory map ( DualFilter_MEM_MAP).

These in and out ports are mapped to the inputs and outputs of DualFilter model, respectively.

This IP-XACT contains a DualFilter component which has two in ports ( LPF_input and LPHPF_input), two out ports ( LPF_output and LPHPF_output), and one bus interface ( PROCESSOR_BUS). The architecture view of this IP-XACT file and the corresponding Simulink model are shown below. The IP-XACT file opens in the MATLAB editor. In this example, we use a Simulink model of a FIR filter as the basis for SystemC or TLM generation. Use the generated TLM component in a virtual platform (VP) as a standalone component in a test bench or attach it to a communication channel. Each parameter is bound to a corresponding read or write register in this tlm socket. In this example, the IP-XACT file specifies one tlm socket with memory map for tunable parameters. The import IP-XACT option generates a TLM component from a Simulink model according to an IP-XACT specification file. This memory map may be simple, detailed, or imported from an IP-XACT specification file.

Depending on the intended use of this SystemC or TLM component, this communication interface could require building a memory map for each input or output in the component. Because each system handles communication differently, you must define a communication interface for the SystemC or TLM component when it is generated from a Simulink model. This socket handles all the incoming and outgoing communication formatted as TLM transactions. In SystemC or TLM, each component communicates through a TLM socket. In Simulink, each block input or output is bound point-to-point to another block. You can use the tlmgenerator target for either Simulink Coder™ or Embedded Coder™. This example shows how to use an imported IP-XACT specification with memory map when you generate a SystemC™ or a Transaction Level Modeling (TLM) component from a Simulink® model with the tlmgenerator target.

Generate register model from sonics ip xact